logo
Enviar mensagem

Detalhes dos produtos

Created with Pixso. Casa Created with Pixso. Produtos Created with Pixso.
Fita UV da liberação
Created with Pixso.

Photosensitive release tape-UV396US

Photosensitive release tape-UV396US

Nome da marca: khj
Número do modelo: UV396US
Informações detalhadas
Lugar de origem:
China
Descrição do produto
Photosensitive release tape-UV396US 0
 
Description

UV396US is a single-sided UV debonding tape with high initial stickiness, and after UV irradiation, the adhesive side will stick The resistance is greatly reduced and can be easily peeled of.
 
Construction

Photosensitive release tape-UV396US 1

Features

● Excellent reliability
● High instant bonding strength, easy to remove components without adhesive residue after UV debonding.
● RoHS Compliant
 
Application

● This product can be used for cutting and positioning protection of various silicon crystals, glass, ceramic capacitors, and PCB boards.
 
Properties

Item Typical Value Test Method
Imperial Metric
Backing 4.0mils 0.1mm /
Total Thickness 4.8mil 0.12mm /
Adhesion to Steel Before UV 4.5lbs/in 20N/25mm GBT 2792-2014
After UV 0.02lbs/in 0.1N/25mm
Tensile Strength Horizontal 40Mpa

 

GBT 30776-2014

 

Vertical 40Mpa
Elongation Horizontal 200%
Vertical 200%

 

Conditions of UV irradiation: UV irradiation energy is 500-600mj/cm2, dominant wavelength is 365nm.

 

Storage


  • Store under normal conditions of 10-30℃ and 40-70% R.H, Dark and opaque conditions.
  • Shelf life: 6 months from the date of manufacture when stored in initial packing.
Precaution Reminder

Surface should be clean, dry, free of dust, oil or other contaminants.
Proper pressure required by roller, hand or press when applying.
Avoid repeat sticking to prevent adhesion decrease.
 
Notes

Please be advised that this technical data sheet is written based on our lab tests and experience only. Customer is responsible to determine the suitability of the product meets intended application requirements before approved for use.